Windows Xp Sp3 Bootable Usb Software Free Download

1. Windows Xp Download To Usb
2. Bootable Windows Xp Pro Iso
3. Create Bootable Usb From Iso Windows Xp
4. Windows Xp Sp3 Bootable Usb software, free download 64-bit
5. Bootable Windows Xp Cd

Windows XP is one of the popular OS Microsoft have ever introduced. In the era of Windows 10, the demand of Windows XP is too high. Though, Microsoft does not provide any support to XP users now, yet the usability of this Windows version can't be compared with other versions. XP supports at very low ended PC and performs well. So, in different sectors and studios, there is still a demand of Windows XP. There are many PCs and notebooks which do not have any CD/DVD ROM support. So, you need to install Windows XP from USB flash drive to those devices. Apart from that, many PCs do not have a working CD ROM and those PCs also need a bootable USB drive to install a Windows XP operating system.

Methods to Create Windows XP Media Center Bootable USB (Installation Guide) Before moving to the installation guide, let me explain how to create a Windows XP Media Center bootable USB. I will list here some easy methods. It's up to you which method you want to use. Method # 1: Easy USB Creator 2.3.1 application (Free). I've recently taken it out of storage and began trouble shooting issues. We have determined there is a software issue, and so I'm trying to install new software from national instruments (via USB file transfer as xp is not allowed to be connected to the network here), but some software requires service pack 3, but we only have 2.

Later versions of Windows e.g. Windows 7, Windows 8, Windows 8.1 and Windows 10 are very easy to handle at the time of creating a bootable pen drive as compared to Windows XP. You can use Microsoft's 'Windows USB/DVD Download Tool' to create a bootable USB stick for Windows 7 and later versions. But, this tool does not have a support for Windows XP. And when you want to create a bootable flash drive for Windows XP, you face a lot of difficulties and you need to follow few advanced steps because Windows XP does not have the feature ‘boot from USB‘ feature. Yet, you can install Windows XP from USB if you make it bootable properly.

In this article, I am showing you how to install windows XP on a PC using a USB flash drive. This procedure lets you install Windows XP OS on a netbook or on a PC that may not have a working CD/DVD drive. Yet, in order to prepare the bootable USB, you need a computer with a CD/DVD drive support and Windows XP installation disk.

When you insert the WIndows XP bootable installation disk into the CD/DVD ROM and restart your computer, you find a screen along with the following message: 'Press any key to boot from CD…'. You get this message as the inserted CD or DVD is a bootable one. When you copy every file of the installer CD and paste it to a USB drive, and then restart your PC, the same thing does not happen to you. You need to make the USB drive bootable and as Microsoft's USB/DVD tool does not support Windows XP, so, things become a little trickier for you. A free tool 'Win to Flash' can be used to transfer bootable Windows XP installation files to a USB flash/pen drive.

There are another few market available apps to create a bootable USB (I also discuss about them in the later part), the latest version of 'WinToFlash' is very appropriate for creating Windows XP USB. The free app also supports the creation of Windows 7,8.8.1 and Windows 10 bootable USB.

Now, let me discuss the best way to set up a bootable USB for Windows XP step by step.

Create Bootable USB and Install Windows XP from USB on a PC or Notebook

To install Windows XP operating system on a Windows PC, you have to follow the below steps.

1. Preparing a USB thumb drive to create a bootable USB flash drive.
2. Setting up the BIOS configuration of your PC to install Windows XP using the USB disk.
3. Install and run Windows XP from USB.
4. Handling with errors during Windows XP installation.

Step #1: Prepare Your USB Thumb Drive to Create Bootable USB Drive

Ratiborus kms tools for office 2016 mac. Requirements:

• USB 2.0 (Minimum 2gb drive space)
• Windows XP bootable installation CD/DVD or ISO
• WinToFlash (download link) free app

Now, follow the below guidelines so that you can easily create a USB flash drive for Windows XP installation.

1. First, download the ‘WinToFlash‘ from the above link. The portable edition of this tool does not require any installation.
2. Just open the app and select the ‘Advanced Mode‘. Under ‘Task‘ option, just select 'Transfer Windows XP setup to USB drive'. See the screenshot below.
3. Click ‘Create‘ button to go to the next window.
4. Tick the 'Use my ISO, RAR, ARJ, ZIP, 7Z, CAB, DMG image or archive' option.
5. Select Windows source path then.
6. Then, under USB drive, select ‘Refresh‘ button to get the list of all USB drives attached to your PC. Select the USB from the drop-down that you prefer to create bootable USB for Windows PC.
7. Tick the option which says – 'Remove the read-only attributes from files'.
8. Under ‘process steps‘ tick the following options: format drive, collect information of text mode, collect information of GUI mode, create folders structure, copy files, install boot, assign a drive letter for set up, create answers file, add additions files for installation process, check the USB drive for errors, transfer all folders from original image.
9. Go to ‘boot loader‘ navigation menu and choose ‘GRUB' boot loader from boot loader option.
10. Click ‘Run‘ button and wait until the bootable copy of Windows XP operating system is created on the USB flash drive.
11. After successful completion, safely remove the USB drive from the PC.

Now, you can install Windows XP directly from the newly prepared USB. The process of installing the OS to the new PC is very simple if you have the proper boot device configuration in your PC. If you have the proper boot configuration, then insert the USB to the PC where you want to install Windows XP. Otherwise, go to next step to know how to set up the BIOS configuration of your PC so that you can directly install Windows OS using bootable USB thumb drive.

Step #2: Configure BIOS Setting to Install Windows XP from External USB Pen Drive – Choose Boot Device Priority

After successfully creating a bootable USB drive, insert the USB to the PC in which you want to install the OS. Then restart your PC and keep pressing Del/F2/Esc key to enter Bios mode. The key may vary due to different motherboard configuration.

1. Enter in the BIOS setting page and navigate to the boot menu. Change the boot preference there. Select ‘Removable disk' as first boot device.
2. Press F10 to save the set up and exit.
3. Restart the PC once again and when you get the option 'Press any key to boot from USB/CD…', just hit any key to install Windows XP to that PC from USB device.

Step #3: How to Install Windows XP from USB Device

Before installing Windows XP on your PC, you need to create new partition on your Windows hard drive or you need to edit the existing partition table. But, create, delete or edit of a hard drive partition using Windows XP is not simple like Windows 7 and later ones. While installing Windows XP from a USB or from a bootable CD, you need to create partition using DOS based set up. Later, the text based setup and GUI setup can be seen. So, you can get a complete guide of installing Windows XP here with an image representation.

Step #4: Bypass Windows Blue Screen of Death while Installing Windows XP Using Bootable USB

At the time of installing Windows XP, you may notice the error message with a blue screen. This may occur due to the following reasons:

• ACHI is enabled. Change SATA disc controller configuration and disable ACHI and try to re-install XP.
• Lack of disk controller or bus (miniport) driver.
• Low space in installation drive.

When an error occurs, try to trace the root cause for the error and know what type of error that is. Then, you can only find the proper solution before you install Windows XP from USB flash drive.

Alternate Method to Create a Bootable USB Disk and Install Windows XP to PC/Computer/Laptop

As I have already mentioned that creating a Windows XP bootable USB is a bit difficult as compared to Windows vista, Windows 7 and the later versions of Windows. ‘Windows to Go' is a brilliant feature that Microsoft includes in Windows 8 and later OS to create a portable USB version of the operating system. But, in case of Windows XP, you need to use a different technique. You can create a bootable Windows USB by just extracting the setup files to USB device and this method is not compatible with Windows XP. So, lets see how to prepare a USB drive and make it bootable with Windows XP. And this procedure requires a fully functional Windows XP operating system.

1. Download and install BartPE builder from the following URL: http://www.nu2.nu/pebuilder/ and install the OS to C:pebuilder. Start PE builder and browse the source Windows XP files and point it. Make sure that you set the output for 'BartPE'. Set the media output as 'Create output image'. You can set the output name as ‘pebuilder.iso'. The full path looks something like that – C:pebuilderpebuilder.iso . Press ‘Build' to create ‘pebuilder.iso' file. At first, make sure that the file is properly created.
2. Create a bootable USB drive for Windows XP: Insert the USB drive to proper port and launch ‘Power ISO'. From the menu, navigate to Tools >> create bootable USB drive. The dialogue with 'Create bootable USB Drive' appears as a pop-up. Confirm the UAC to continue. From ‘create bootable USB' dialogue window, click '…' button and open the 'c:pebuilderpebuilder.iso' file. In 'Destination USB drive', choose the correct USB drive. Choose writing method as ‘USB-HDD'. Then, click the ‘Start' button to start creating bootable flash drive for Windows XP.
3. After successfully completion of the process, copy setup file (from i386 folder) of Windows XP to USB drive. That's all. The USB drive is ready now to install Windows XP from USB.
4. Launch Windows XP setup from a flash drive: Plug-in the USB device to your PC. Run the command: {usb drive letter}:i386winnt32.exe /syspart:C: /tempdrive:C: /makelocalsource. ‘C:' is the drive where you want to install your Windows XP. You can change it if you want to install the OS on a different partition. At the time of this installation process, if you see the notice which says: 'Do you want to convert the installation volume to NTFS?', just answer ‘No'. After that the setup program closes automatically.
5. Reboot your PC and unplug the USB this time. Change the BIOS setting and select boot device priority to 'boot from hard disk'. Now, you are done and just wait until installation finishes.

Final Words:

If you follow on screen instruction while installing Windows XP to any PC, it will be much easier for you to install and run the OS from USB. So far, I try to cover two best methods along with associated steps, problems and solutions to install Windows XP to your PC. If you find any better way to install Windows XP to a PC or to a notebook, don't forget to drop comment in below comment section. However, if you wish to install the latest OS i.e. Windows 10 in your PC, read our guide on installing Windows 10 from bootable USB.

Microsoft released XP in October 2001 in different editions like XP Pro, Starter, and Media Center Edition, etc. Its Tablet PC Edition was released in November 2002. This edition is not available for PC. It's a compact version of Windows XP only for tablets and notebook computers. The basic features are limited in it. 2003 chevy silverado 1500 service manual. However, it includes some stunning features from XP Pro to facilitate businessmen and professionals.

Microsoft stopped its official support for Windows XP. But users still want to use it for their research work or for only fun.

Related: Windows XP Pro ISO

Download Windows XP Tablet PC Edition

Download Requirements

• Memory: 512MB
• Hard Disk Space: 4GB

Methods to Create Windows XP Tablet PC Edition Bootable USB (Installation Guide)

Before installation, convert the ISO image into an executable file. For this, follow the methods below. I have discussed three easy methods in this context. Follow any of them and the installation guide.

Method # 1: Easy USB Creator 2.3.1 application (Free)

It's a free and simple tool to convert the ISO image into an executable file. The tool can be used for Windows XP, Vista, Windows 7, 8 10 and Windows Server all editions.

You can use it with '.NET Framework 2.0' or above. You can download the '.NET Framework' from Microsoft's official site. It converts the ISO image into a bootable USB drive. It is a straightforward tool and converts Windows XP ISO image into a bootable USB drive.

1. Connect a USB flash drive with the PC.
2. Go to the above section and download the ISO file of Windows XP Tablet PC Edition.
3. Now, download the Easy USB Creator 2.3.1 from Here.
4. Double-click the '.exe file' to install it.
5. Now, launch the tool.
6. It shows a sign like '…' this with the ISO file option. Select this sign to add the path of the Windows XP ISO file.
7. Next, you will see 'Destination Drive.' Select a drive where you want to save the 'executable file' and click 'Start.'
8. The application instantly converts the ISO image into a bootable file. Within half a minute, your bootable USB is ready.

Note: If you have a zipped Windows XP ISO file, download 7-Zip Extractor. 7-Zip Extractor will extract the files from the zipped folder.

Method # 2: Bootable USB/DVD via USB Creator 2.0 (Microsoft's Tool)

USB Creator 2.0 tool is the official tool of Microsoft. If you don't want to use a third-party tool, use 'USB Creator 2.0.' It's available at Microsoft's official site. Download it from there and follow the steps given here.

1. Connect the USB to your tablet PC.
2. Download the ISO file from the above section.
3. Select USB/DVD to save the ISO image.
4. Now, open the tool 'USB Creator 2.0' and select 'Browse' to locate the ISO file.
5. Below this option, there is 'Destination Drive.'
6. Select the USB drive from here.
7. Now click the 'Create USB' option at the bottom of the tool. It will start converting the ISO image into the Bootable USB.

Installation Guide

(First, enter in BIOS to enable the option 'Installation from USB'.) For this, follow the steps here.

1. Reboot system and press 'Del' to enter BIOS. (If your system is showing any other key, like F1, F2, press it.
2. Select 'Advanced BIOS settings' by using Up/Down or Right/Left arrow keys.
3. Press 'USB as the primary boot device' and 'F10' to exit BIOS.
4. Now, connect your bootable USB to the system and restart it.
5. First, select the PC version. Mostly it is 32-bit.
6. Select 'Install from USB' and click 'Next' from there.
7. The system starts copying files from the USB drive.
8. Make partitions of the hard disk drive by assigning a relevant volume to each partition.
9. Select a partition where you want to save Windows XP Tablet PC Edition.
10. It will collect information first.
11. Then Dynamic Updates are installed.
12. Later, it shows that it's preparing installation.
13. Now, the installation is finalized.
14. Wait until it completes the installation process. The process may take about 40 minutes.
15. Meanwhile, the PC restarts several times. Don't press any key to interrupt the installation process.
16. Now, set the time and date according to the geographical location.
17. Enjoy using Windows XP Tablet PC Edition.

Windows XP Tablet PC Edition Features

It's fully compatible with a pen-sensitive screen.

This edition supports the portrait-oriented screen and handwritten notes.

It's only offered to MSDN and Volume License subscribers.

It has Encrypted File System to let you encrypt files on an NTFS partition.

It includes the Tablet PC Input Panel to support touch-screen notebook PCs.

Sticky Notes help you to take notes now and then while attending a meeting. You don't need a traditional notebook and pen now.

It includes some interesting games like InkBall.

Windows Journal makes the handwritten notes taking easier for users. You use it to illustrate drawings too. It's saved in the '.JNT' format. This feature is now discontinued in Windows 7 and the latest versions.

Windows Xp Download To Usb

It has a remote assistance feature to troubleshoot problems. You can access a remote desktop by using it.

Bootable Windows Xp Pro Iso

1. Enter in the BIOS setting page and navigate to the boot menu. Change the boot preference there. Select ‘Removable disk' as first boot device.
2. Press F10 to save the set up and exit.
3. Restart the PC once again and when you get the option 'Press any key to boot from USB/CD…', just hit any key to install Windows XP to that PC from USB device.

Step #3: How to Install Windows XP from USB Device

Before installing Windows XP on your PC, you need to create new partition on your Windows hard drive or you need to edit the existing partition table. But, create, delete or edit of a hard drive partition using Windows XP is not simple like Windows 7 and later ones. While installing Windows XP from a USB or from a bootable CD, you need to create partition using DOS based set up. Later, the text based setup and GUI setup can be seen. So, you can get a complete guide of installing Windows XP here with an image representation.

Step #4: Bypass Windows Blue Screen of Death while Installing Windows XP Using Bootable USB

At the time of installing Windows XP, you may notice the error message with a blue screen. This may occur due to the following reasons:

• ACHI is enabled. Change SATA disc controller configuration and disable ACHI and try to re-install XP.
• Lack of disk controller or bus (miniport) driver.
• Low space in installation drive.

When an error occurs, try to trace the root cause for the error and know what type of error that is. Then, you can only find the proper solution before you install Windows XP from USB flash drive.

Alternate Method to Create a Bootable USB Disk and Install Windows XP to PC/Computer/Laptop

As I have already mentioned that creating a Windows XP bootable USB is a bit difficult as compared to Windows vista, Windows 7 and the later versions of Windows. ‘Windows to Go' is a brilliant feature that Microsoft includes in Windows 8 and later OS to create a portable USB version of the operating system. But, in case of Windows XP, you need to use a different technique. You can create a bootable Windows USB by just extracting the setup files to USB device and this method is not compatible with Windows XP. So, lets see how to prepare a USB drive and make it bootable with Windows XP. And this procedure requires a fully functional Windows XP operating system.

1. Download and install BartPE builder from the following URL: http://www.nu2.nu/pebuilder/ and install the OS to C:pebuilder. Start PE builder and browse the source Windows XP files and point it. Make sure that you set the output for 'BartPE'. Set the media output as 'Create output image'. You can set the output name as ‘pebuilder.iso'. The full path looks something like that – C:pebuilderpebuilder.iso . Press ‘Build' to create ‘pebuilder.iso' file. At first, make sure that the file is properly created.
2. Create a bootable USB drive for Windows XP: Insert the USB drive to proper port and launch ‘Power ISO'. From the menu, navigate to Tools >> create bootable USB drive. The dialogue with 'Create bootable USB Drive' appears as a pop-up. Confirm the UAC to continue. From ‘create bootable USB' dialogue window, click '…' button and open the 'c:pebuilderpebuilder.iso' file. In 'Destination USB drive', choose the correct USB drive. Choose writing method as ‘USB-HDD'. Then, click the ‘Start' button to start creating bootable flash drive for Windows XP.
3. After successfully completion of the process, copy setup file (from i386 folder) of Windows XP to USB drive. That's all. The USB drive is ready now to install Windows XP from USB.
4. Launch Windows XP setup from a flash drive: Plug-in the USB device to your PC. Run the command: {usb drive letter}:i386winnt32.exe /syspart:C: /tempdrive:C: /makelocalsource. ‘C:' is the drive where you want to install your Windows XP. You can change it if you want to install the OS on a different partition. At the time of this installation process, if you see the notice which says: 'Do you want to convert the installation volume to NTFS?', just answer ‘No'. After that the setup program closes automatically.
5. Reboot your PC and unplug the USB this time. Change the BIOS setting and select boot device priority to 'boot from hard disk'. Now, you are done and just wait until installation finishes.

Final Words:

If you follow on screen instruction while installing Windows XP to any PC, it will be much easier for you to install and run the OS from USB. So far, I try to cover two best methods along with associated steps, problems and solutions to install Windows XP to your PC. If you find any better way to install Windows XP to a PC or to a notebook, don't forget to drop comment in below comment section. However, if you wish to install the latest OS i.e. Windows 10 in your PC, read our guide on installing Windows 10 from bootable USB.

Microsoft released XP in October 2001 in different editions like XP Pro, Starter, and Media Center Edition, etc. Its Tablet PC Edition was released in November 2002. This edition is not available for PC. It's a compact version of Windows XP only for tablets and notebook computers. The basic features are limited in it. 2003 chevy silverado 1500 service manual. However, it includes some stunning features from XP Pro to facilitate businessmen and professionals.

Microsoft stopped its official support for Windows XP. But users still want to use it for their research work or for only fun.

Related: Windows XP Pro ISO

Download Windows XP Tablet PC Edition

Download Requirements

• Memory: 512MB
• Hard Disk Space: 4GB

Methods to Create Windows XP Tablet PC Edition Bootable USB (Installation Guide)

Before installation, convert the ISO image into an executable file. For this, follow the methods below. I have discussed three easy methods in this context. Follow any of them and the installation guide.

Method # 1: Easy USB Creator 2.3.1 application (Free)

It's a free and simple tool to convert the ISO image into an executable file. The tool can be used for Windows XP, Vista, Windows 7, 8 10 and Windows Server all editions.

You can use it with '.NET Framework 2.0' or above. You can download the '.NET Framework' from Microsoft's official site. It converts the ISO image into a bootable USB drive. It is a straightforward tool and converts Windows XP ISO image into a bootable USB drive.

1. Connect a USB flash drive with the PC.
2. Go to the above section and download the ISO file of Windows XP Tablet PC Edition.
3. Now, download the Easy USB Creator 2.3.1 from Here.
4. Double-click the '.exe file' to install it.
5. Now, launch the tool.
6. It shows a sign like '…' this with the ISO file option. Select this sign to add the path of the Windows XP ISO file.
7. Next, you will see 'Destination Drive.' Select a drive where you want to save the 'executable file' and click 'Start.'
8. The application instantly converts the ISO image into a bootable file. Within half a minute, your bootable USB is ready.

Note: If you have a zipped Windows XP ISO file, download 7-Zip Extractor. 7-Zip Extractor will extract the files from the zipped folder.

Method # 2: Bootable USB/DVD via USB Creator 2.0 (Microsoft's Tool)

USB Creator 2.0 tool is the official tool of Microsoft. If you don't want to use a third-party tool, use 'USB Creator 2.0.' It's available at Microsoft's official site. Download it from there and follow the steps given here.

1. Connect the USB to your tablet PC.
2. Download the ISO file from the above section.
3. Select USB/DVD to save the ISO image.
4. Now, open the tool 'USB Creator 2.0' and select 'Browse' to locate the ISO file.
5. Below this option, there is 'Destination Drive.'
6. Select the USB drive from here.
7. Now click the 'Create USB' option at the bottom of the tool. It will start converting the ISO image into the Bootable USB.

Installation Guide

(First, enter in BIOS to enable the option 'Installation from USB'.) For this, follow the steps here.

1. Reboot system and press 'Del' to enter BIOS. (If your system is showing any other key, like F1, F2, press it.
2. Select 'Advanced BIOS settings' by using Up/Down or Right/Left arrow keys.
3. Press 'USB as the primary boot device' and 'F10' to exit BIOS.
4. Now, connect your bootable USB to the system and restart it.
5. First, select the PC version. Mostly it is 32-bit.
6. Select 'Install from USB' and click 'Next' from there.
7. The system starts copying files from the USB drive.
8. Make partitions of the hard disk drive by assigning a relevant volume to each partition.
9. Select a partition where you want to save Windows XP Tablet PC Edition.
10. It will collect information first.
11. Then Dynamic Updates are installed.
12. Later, it shows that it's preparing installation.
13. Now, the installation is finalized.
14. Wait until it completes the installation process. The process may take about 40 minutes.
15. Meanwhile, the PC restarts several times. Don't press any key to interrupt the installation process.
16. Now, set the time and date according to the geographical location.
17. Enjoy using Windows XP Tablet PC Edition.

Windows XP Tablet PC Edition Features

It's fully compatible with a pen-sensitive screen.

This edition supports the portrait-oriented screen and handwritten notes.

It's only offered to MSDN and Volume License subscribers.

It has Encrypted File System to let you encrypt files on an NTFS partition.

It includes the Tablet PC Input Panel to support touch-screen notebook PCs.

Sticky Notes help you to take notes now and then while attending a meeting. You don't need a traditional notebook and pen now.

It includes some interesting games like InkBall.

Windows Journal makes the handwritten notes taking easier for users. You use it to illustrate drawings too. It's saved in the '.JNT' format. This feature is now discontinued in Windows 7 and the latest versions.

Windows Xp Download To Usb

It has a remote assistance feature to troubleshoot problems. You can access a remote desktop by using it.

Bootable Windows Xp Pro Iso

Terminal Services Session allows you to access data from a remote computer.

It supports Windows 98 and Windows Me programs. You can upgrade from both Windows OS to Windows XP Tablet PC Edition.

Windows XP Tablet PC Edition also supports Win2K and NT.

It supports IP Security, Client Services for NetWare, SNMP and Network Monitor.

FAQ

Can I install it by using the Command Prompt?

No, you can't.

Can I install Windows XP Tablet PC Edition in multiple systems by using one bootable USB?

No, you can't. Windows XP Tablet PC Edition's one copy is only for one user.

Can I play DOS games on Windows XP Tablet PC Edition?

Yes, but it supports only the old DOS games. You can't play the latest DOS games.

Create Bootable Usb From Iso Windows Xp

Is it safe to use XP Tablet PC Edition now?

Microsoft has stopped security updates for it. That's why it may be risky to use it. New viruses can attack to it.

May I get an official copy of XP Tablet PC Edition from Microsoft?

Windows Xp Sp3 Bootable Usb software, free download 64-bit

Yes you can forward a request to Microsoft to get its copy.

Are the people still using Windows XP around the world?

Bootable Windows Xp Cd

Yes, about 7% of people are using it for fun or for research work.